The following safety precautions should be taken when installing REVERSE CAMERAS

truck reverse camera，Heavy duty camera，Rear View Camera For Truck

Prepare tools and materials: Ensure that the quality of the tools and materials used is reliable and adequately prepared installing REVERSE CAMERA

Determine installation location: Based on the truck model and body structure, choose the optimal installation location, usually at the rear/front and top of the side to enhance visibility.

Install camera: Use a screwdriver and drill to secure the camera and ensure that it is installed firmly and stably, providing a good view.

Wiring connection: The cable connecting the camera needs to be reserved with sufficient length and connected to the internal power supply of the vehicle, using car specific wires to avoid poor contact.

Wiring and routing: Be careful when disassembling the bumper or door panel to avoid damaging the clips or interior. The routing should be arranged reasonably along the body of the vehicle and fixed with tape or straps.

Safe wiring: Use a test pen to find the positive pole of the reversing light and fix it together with the camera reversing signal line to avoid wire breakage and confusion in the circuit.

Test: After all wiring harnesses are connected, start the vehicle and shift into reverse gear to check if the reverse image function is normal and if the camera angle and height are appropriate.

Professional installation: For specialized operations such as drilling, it is recommended to entrust them to professional staff to ensure installation technology and safety.

During the installation process, it is essential to follow safety operating procedures to avoid causing damage to the vehicle or affecting its original functions. If unsure how to operate, it is best to consult a professional.